Description  :

  1) Set includes : 1 x portafilter handle, 1 x paddle, 1 x steam control lever.

  2) Wood Species : all African premium hardwood.
        -. choice1) Red color     : Bubinga (Portafilter handle), Paurosa (Paddle, Steam control lever) 
        -. choice2) Yellow color : Zebra     (Portafilter handle, Paddle, Steam control lever) 
        -. choice3) Dark color    : Wenge   (Portafilter handle), Panga panga(Paddle, Steam control lever)
 

  3) Size(mm) :
        -. Portafilter handle : approx. Φ33 x 135L, M12 stainless bolt with 80 depth inside.
        -. Paddle : approx. 22T x 51W x 59L , M4x12 L bolt 2pcs included.
        -. Steam control lever : approx. Φ20 x 40L , M8 female screw same as original.

       Size(inch) :
        -. Portafilter handle : approx. Φ1.3 x 5.3 L, M12 stainless bolt with 3.1 depth inside.
        -. Paddle : approx. 0.86T x 2W x 2.3L, M4x0.5L bolt 2pcs included.
        -. Steam control lever : approx. Φ0.78 x 1.6L, M8 female screw same as original.

   4) Finishing : 3~7 times applied with 2~3 kinds of German premium natural oil.  
        oiling1 → 1day drying & sanding → oiling2 → 1day drying → oiling3 → 1day drying ~~~        
        In order to achive higher durability against water and heat, we put much efforts with handmade process. 
        You can also take luxury touch feeling with fignertips.    
        We do not apply on our wood products with chemical finishing materials like urethane which contains 
        harmful components.        
        Of course, natural oil is more expensive and need much manual labor for repeated appling.        
        We want to sell the right products finished with natural oil than urethane.   
  
   5) There are somewhat distribution of wood grain & color due to natural material.

   6) Steam control lever :  
            When you insert wooden lever into the shaft, please try to insert by following the thread smoothly.
            Even if the lever do not go into the shaft easily at first, please do not push it with force.
            Then, pull it back and insert it again by following the thread smoothly.
            That's why wooden thread may crumble by force. 

Separation original portafilter handle : 

    1) It's just very hard to separate original rubber/plastic handle from group head by only manual or tool force.
        Solution1) Do heat up the group head for 1~2 hours enough on machine.
        Solution2) Do heat up the group head on the gas range, holding handle with wet towel, in order to vaporize
           instant glue that might applied between head and bolt.
        Solution1) is recommend than Solution2). That's why Solution2) may occur some soot on head by flame.
        Then, original handle become unthread somewhat easily with manual turning force.
        It may need a vice tool for stronger force depend on machine brand.
        Then, please do insert our wooden handle into group head by hand.

    2) Cap end style : 
          Unfix the cap of original handle end and rotate it with appropriate allen wrench. (BFC Deluxe is 14mm.)

※ Caution for portafilter wooden handle : Please refer below photo.
     -. When washing in water, please do not drop wooden handle/parts in water.
        That's why its oil coated surface become dull by repeated contact to water.
        Every oil-finished wooden products are same condition.    

        Do not lose your chance to enjoy more delightful espresso time!